From 2004 to 2013, Yamaha produced the Yamaha Raptor 350. It had strong handling, low-to-midrange power, and edgy looks. But what is the Yamaha Raptor 350 oil capacity?
With its thrilling off-road capabilities. This four-wheeler was a joy to ride on trails. The Yamaha Raptor 350 is a popular all-terrain vehicle (ATV) designed for off-road adventures. The performance, acceptance, and design of this sporty 4×4 were unsurpassed. Raptor 350 saw its production run extended by ten years as opposed to its big-bore sibling.
Regular maintenance is important for this vehicle, including oil changes. Knowing the correct oil capacity for your machine is a crucial factor. For performing an oil change. In this article, we will cover everything you need to know about the Yamaha Raptor 350 oil capacity.
Yamaha Raptor 350 Specs
Engine:
Raptors are powered by air-cooled, single-cylinder, four-stroke SOHC engines. In terms of bore-stroke ratio, the forward-inclined power mill measures 83 by 64.5 mm (3.27 by 2.54 inches). A 349 cm3 engine, a 9.20:1 compression ratio, and wet-sump lubrication make it a well-rounded machine. Flowing air and fuel through a wet-type air filtration system is a Mikuni BSR36 carburetor with a 36-mm bore. A maximum power output of 16.4 kW (22.3PS) can be achieved by the Yamaha Raptor 350. Unleaded gasoline with an Octane number of 87+ at the pump and 91+ at the research pump is sufficient to fill the vehicle’s tank.
Lubrication:
Raptors have a capacity of 2.64 US quarts/2.5 liters of oil when drained. When disassembled, it holds 3.38 US quarts/3.2 liters. When the oil filter is changed, the capacity is 2.75 US quarts/2.6 liters. For clutch slippage prevention, use Yamalube 4 4-stroke oil or equivalent with an API grade of at least SJ (and no anti-friction modifiers or additives), depending on the ambient temperature.
Drivetrain:
The wheels are powered by an automatic clutch with a wet, centrifugal clutch and a six-speed constant mesh shaft drive. A 76/24 (3.167) reduction ratio is found on the primary spur gear. There are 36/16 gears in the first gear (2.685) and 23/29 gears in the sixth gear (0.946). With a turning radius of 10.2 feet, smoother handling is possible.
Ignition:
With an electric start system and auxiliary mechanical recoil backup, the Raptor 350 uses DC-CDI ignition. The electronic accessories are powered by an AC-magneto generator system made by F4T466/MITSUBISHI. This system requires a 12V, 8.6 Ah, 190-CCA (Cold Cranking Amps) YTZ10S battery and a 15-Amp main fuse. It’s important to keep your battery in good shape, so you’ll want to invest in a Battery Tender with Smart BMS (view on Amazon). The American, European, Canadian, and Oceanian models require an NGKDR8EA with a gap between 0.6 and 0.7 mm (0.024-0.028).
Tires:
The wheels are mounted tubeless with Dunlop KT851B AT21 tires up front and Dunlop KT877A AT20 tires up rear. There should be a pressure of 25 kPa (0.25 kgf/cm2, 3.6 psi) in both front and back tires. When airing tires, keep the pressure within the range of 3.2 psi/22 kPa (0.22 kgf/cm2) and 4.1 psi/28 kPa (0.28 kgf/cm2). If the tire beads are seated at 36 psi/250 kPa (2.5 kgf/cm2), the maximum pressure should be 36 psi/250 kPa (2.5 kgf/cm2). If your rear tires are worn out, replace them with ITP Holeshot XCR 6 Ply ATV Tires (view on Amazon).
Brakes:
In order to provide stopping power, the Yamaha Raptor 350 uses two hydraulic disc brakes, one left-foot operated and one right-hand operated.
Suspension:
A double-wishbone front suspension and coil spring shocks are mounted in the vehicle’s steel frame, while a swingarm link rear suspension is mounted with coil springs and gas shocks. It has a 200 mm (7.87 inches) front wheel travel and 210 mm (8.27 inches) rear wheel travel.
Dimensions:
A total of 69.7 x 43.1 x 42.5 inches (1,770 x 1,095 x 1,080 mm – L x W x H) make up the overall dimensions. As a result, the ground clearance of the vehicle must be no less than 4.53 inches (115 mm), while its wheelbase must be no less than 47.6 inches (1,210 mm). There is a curb weight of 180 kilograms/397 pounds. There is a 32.3-inch/820-millimeter height difference between the seat and the backrest.
Exterior:
With a caster angle of 6° and a 26-mm trail, the Raptor 350 has a steel tube frame and plastic body. Front and rear fenders are standard, as well as hand grips and 45-mm footpegs. Front and rear fenders are fitted with two 30-watt headlights, a 21-watt taillight, and a 1.7-watt indicator light. Improve visibility during late-night wheeling by converting these lights to LEDs.
Yamaha Raptor 350 Cost
The base Raptor model could cost anywhere between $4,999 and $5,599 depending on models, trims, and packages. You would have to add at least $700 in accessories to the list price of your chosen model if you add GYTR aluminum engine skid plates, front grab bars, antennas, hour meters, tachometers, and complete racer packs. You would have to spend even more money if you added mods.
A typical auction listing costs between $1,700 and $5,460 and usually belongs to a model year between 2004 and 2007. There are mostly modded or near-stock mint condition units up for auction. Models from 2008 and recent years are rare in auctions and on trader sites, which can cost between $2,500 and $4,000. Regardless of the year of manufacture, white-and-gray trim seems to maintain its value well.
What is Oil Capacity?
Oil capacity means the amount of oil required to fill a machine’s oil reservoir. The oil reservoir is part of the engine that stores the oil. Just before it is pumped through the engine to lubricate the moving parts. Knowing the correct oil capacity for your machine is essential. For maintaining proper engine function and prolonging its lifespan.
Why is Oil Capacity Important?
There are several reasons why it is important to use the right amount of oil when you are cooking. When the engine oil is overfilled or underfilled, it can have a negative impact on the performance of the engine. It is important to maintain the correct oil capacity in an engine or machine for several reasons:
Lubrication: If there is not enough oil in the system. The lack of adequate lubrication may cause increased friction, wear and tear, and possibly even part damage.
Cooling: Oil also helps to dissipate heat from the engine or machine. The oil cools down as it moves through the system, absorbing heat from the components as it does so. A lack of oil may prevent the oil from effectively absorbing and dissipating heat. Which could cause overheating and even engine damage.
Contamination: Over time, dirt, debris, and other particles may contaminate the oil. By maintaining the proper oil capacity, you can keep the engine or machine running smoothly. Enough oil in the system to lubricate and remove any impurities.
Performance: Finally, maintaining the correct oil capacity can help to ensure that an engine or machine performs at its best. The engine or machine may not be able to operate at its best when there is not enough oil in the system. Which could reduce power and efficiency.
Does A High-Performance Oil Produce More Power?
Due to things like thermodynamics, which can’t be changed much, there will always be some loss of engine output. However, oil drag accounts for about 6% of that loss. It is possible to minimise this loss and increase engine power by using quality but low viscosity oil. An engine oil with a lighter viscosity can improve the peak power by 2bhp for a motorcycle with 100bhp.
Does Engine Oil Have An Expiry Date?
It is possible to no longer guarantee engine performance levels when engine oils have passed their expiration date. Nevertheless, if you don’t open your oil, it will take years and years to degrade. Most likely, your oil will be fine even if it has been opened and is a couple of years out of date. The additives in the oil may have oxidized if it’s 5 years old, so you’re better off buying fresh oil if you’ve already opened it and it’s five years old.
What is the Yamaha Raptor 350 Oil Capacity?
Depending on the model year, the Yamaha Raptor 350‘s oil capacity varies. The typical oil capacity of the Raptor 350 is 2.10 quarts or 2 liters. To ensure you have the precise oil capacity for your machine, consult your owner’s manual.
It’s crucial to use the right kind of oil that Yamaha recommends for your Raptor 350. Engine damage can result from using the incorrect type or viscosity of the oil. Yamaha suggests using four-stroke engine oil with an API rating of at least SJ.
What Type of Oil Used in Yamaha Raptor 350?
A 10W-40 4-stroke motor oil. That satisfies or exceeds the JASO MA standard is the suggested oil type for the Yamaha Raptor 350.
Utilizing high-quality, specially formulated oil is crucial. Considering that the engines in motorcycles and ATVs often operate at higher RPMs and temperatures. The proper oil can reduce friction, increase efficiency, and lessen engine wear.
While the engine is still warm, it is advised to drain the old oil. Add the recommended amount of new oil after changing the oil filter. Make sure to use the dipstick to check the oil level and adjust as necessary.
It’s important to adhere to the manufacturer’s suggested intervals for oil changes. because regular oil changes are necessary to keep the engine healthy and prevent accelerated wear or damage.
When Should You Change Your Raptor 350’s Oil?
Maintaining the performance of your Raptor 350 requires regular oil changes. Depending on the mileage and the oil change interval, Yamaha recommends changing the oil once a year or after 20 hours. If you use your Raptor 350 for racing, in challenging conditions, or with heavy loads, you might need to change the oil more often.
It is essential to regularly check the oil level and color. The oil may need to be changed if it is dirty, dark in color, or the level is low. Additionally, burnt-smelling oil could indicate engine damage or overheating. It needs to be altered immediately.
How to Change Your Raptor 350’s Oil
The process of changing the oil in your Raptor 350 is fairly straightforward. These are the general actions you should take:
Make sure the engine is cool and the machine is on level ground.
- Thoroughly drain the engine’s oil and replace the drain plug
- Drain any used oil into a suitable container to prevent spilling it on the ground.
- Drain the engine’s oil well, then replace the drain plug.
- After swapping out the oil fill cap, start the engine. Check the level and top off the oil if necessary.
- Recycle the used oil the right way.
You must carefully follow the directions in your owner’s manual because they may change depending on the model year.
Battery
For the Yamaha Raptor 350, a 12-volt battery with a minimum 6Ah capacity is required. The YTX7L-BS brand of batteries is compatible with the Yamaha Raptor 350. Verifying that the new battery meets the required measurements and specifications is essential. When changing the battery, insert it into the compartment. It’s important to check the charging system as well. Verify that it functions well. because a damaged charging system could cause an early battery failure
You should abide by the instructions for battery maintenance and replacement provided by the manufacturer. Seek professional advice if you have questions regarding any aspect of the procedure.
Engine
The Yamaha Raptor 350 has a 348cc SOHC (single overhead cam), liquid-cooled, 4-stroke engine. An electric starter powers the engine, which has a 9.2:1 compression ratio. It also features a five-speed manual transmission with reverse.
A forged aluminum piston, a ceramic composite cylinder. The engine of the Raptor 350 also consists of a high-capacity radiator with a thermostatically controlled fan. It produces a maximum power output of 22.4 horsepower at 8,500 RPM. Maximum torque of 19.4 Nm at 6,500 RPM. For the engine to remain in good condition and last a long time, proper maintenance and routine servicing are essential. A regular oil change, the cleaning or replacement of the air filter, and valve adjustments are all included. Utilizing premium fuel and avoiding challenging riding conditions are also advised. They can put excessive strain on the engine.
Plastics kit
For the Yamaha Raptor 350, several aftermarket businesses provide plastics kits. They can be used to update the ATV’s appearance or swap out worn-out or damaged plastics.
Since not all plastic kits are compatible with all ATV models, it is crucial to choose one that is specifically made for the Yamaha Raptor 350. A kit’s fit and finish should also be examined because some less expensive kits may not fit well or may be of lower quality than more expensive ones. Maier, Acerbis, and UFO are a few well-known suppliers of plastic kits for the Yamaha Raptor 350. There are many different colors and designs available from these businesses, such as solid colors, graphics kits, and textured finishes.
It’s crucial to adhere to the installation instructions provided by the manufacturer, which may call for removing the old plastics and fastening the new ones with screws or plastic rivets. In addition, it is advised that due to their fragility and propensity for chipping or cracking, new plastics be installed with caution in order to prevent damage.
Conclusion
You might now have an idea about Yamaha Raptor 350 oil capacity. The longevity and performance of your Yamaha Raptor 350 depend on regular maintenance. A crucial part of that maintenance is routine oil changes. An essential step in performing an oil change is determining the proper oil capacity for your machine. The Yamaha Raptor 350’s oil capacity is approximately 2.10 quarts or 2 liters.
FAQ’s
For a Yamaha Raptor 350, what kind of oil should I use?
Yamaha suggests using a 10W-40 oil that meets the JASO MA requirements.
How often should I have my Yamaha Raptor 350’s oil changed?
If more than 20 hours have passed since the last oil change, Yamaha recommends changing the oil once a year or after 20 hours of operation. Raptor 350 oil changes may be more frequent if you ride in muddy or dusty conditions.
Can I run my Yamaha Raptor 350 with synthetic oil?
You can run your Yamaha Raptor 350 with synthetic oil, yes. However, Yamaha advises using a superior mineral-based oil that complies with JASO MA requirements.
When changing the oil on my Yamaha Raptor 350, should I also change the oil filter?
To ensure maximum engine protection, Yamaha advises changing the oil filter every time you change the oil in your Raptor 350.
What is the fuel consumption of the Yamaha Raptor 350?
The minimum octane rating for regular unleaded fuel for the Yamaha Raptor 350 is 87.
Leave a Reply