Car problems can be confusing and cause people to think hard. Cold weather can put a strain on many of your vehicle’s components. Especially modern while vehicle riders think, why does my car heater take ages to warm up? They also think why is my car heater blowing cold air?
The car heater typically works together with the coolant, thermostat, radiator, and water pump in the car’s cooling system. A car heater relies on the engine’s cooling system components.
In order to efficiently dissipate heat and prevent the engine from overheating, while you are trying to stay warm.
However, if you’ve often noticed that in your car heater takes ages to warm up. It could result in wasting more gas. Also, emissions when driving your car.
If one or more of these problems exist, your car can vent chilly air instead of heated air. The following issues are the reason why your car heater takes ages to warm up;
1. Low coolant levels in the radiator
2. Clogged or broken heating controls
3. Dysfunctional thermostat
4. Faulty heater valve
5. Problems with Heater Core
6. Coolant System Leaks
7. Problem with Water Pump
8. Uncontrolled HVAC
9. Stagnant Antifreeze through the Heater Component
Now take a look at each of these issues in more in-depth…
Low coolant levels in the radiator
Coolant, also known as radiator fluid, plays a crucial role in your car heater. Low coolant levels is the main reason why your car heater takes ages to warm up indeed.
However, it’s essential to maintain the radiator fluid in your vehicle not only in the summer but also in the winter. Because the coolant helps to regulate the temperature of your vehicle’s engine. Also plays a role in heating the interior of your car.
Moreover, the appropriate level for the coolant is indicated by the F and L marks on the side of the coolant reservoir. The coolant level should be within this range indeed.
However, it’s recommended to have the coolant serviced in the fall or spring if it is time for a refill or maintenance.
Clogged or broken heating controls
In a car’s heating system, the controls are responsible for regulating hot air flow into the cabin. A clogged or broken heating controls in car heater is another main cause why the car heater takes ages to warm up?
If the controls are clogged in your car heater, then it means that there is some sort of obstruction or blockage. While that is preventing the controls from functioning properly.
This could be caused by dirt, debris, or other foreign substances that also have accumulated in the control mechanism.
When your car’s heating controls are clogged, you can try to clean them. Use a cloth or a small brush in order to gently remove any dirt or debris that may be blocking the airflow.
If the controls are broken, you will also likely need to have them repaired or replaced by a mechanic.
Dysfunctional thermostat
Your car’s thermostat works with your car’s radiator and coolant. A thermostat also helps regulate the temperature inside a vehicle by controlling the coolant flow through the radiator and heater core.
If there is a problem with the thermostat, such as it being stuck open, it can cause the car to take longer to warm up and the temperature gauge may not rise immediately after starting the vehicle. However, this can be an indication of an issue with the thermostat.
While it is essential to address any issues with a stuck open thermostat in your car promptly. Neglecting to do so could result in the engine overheating and potentially causing significant damage that may be costly to repair.
It is recommended to have the thermostat repaired or replaced as soon as possible to avoid any potential issues.
In order to fix a stuck open thermostat, the heater core is fueled with enough coolant. To generate the heat that keeps your car warm otherwise you need to access the thermostat and replace it with a new one. However, without a mechanic, you can fix a broken thermostat.
How To Fix a Broken Thermostat
- First, allow the car to cool for a period of 15 to 20 minutes before proceeding
- Locate the thermostat. The thermostat can be found at the bottom of the radiator, situated between the core and the main hose
- Then, gently remove the radiator cap.
- To drain the coolant, position a bucket below the radiator and remove the hose.
- Then, remove and replace the thermostat
- Now, attach the hose to the radiator.
- Place the reservoir cap back on after adding the coolant.
- Start the engine after lowering the car.
- See if the heat comes around while you wait.
- Check the coolant level after a test drive to be sure it hasn’t fallen.
Below there is also a practical show in how to replace a broken thermostat;
Faulty heater valve
The temperature of the air blowing inside your car’s cabin is maintained by the heater valve. Also, the temperature of air blowing within the place of your automobile is managed by the car heater valve.
According to the heater temperature that you specify, this valve regulates the flow of coolant inside the heater core indeed. If this valve becomes stuck or malfunctions, then it will take ages to warm up. The heater core won’t be able to respond to your needs until you fix or replace it.
Problems with Heater Core
The heater core is another potential source for your car heater’s problem. Although the coolant level in your car may be enough, the heater core could be blocked.
Also, the coolant entering the heater core needs a suitable route to be followed. The heater in your vehicle won’t operate at all while the heater core is clogged. However, it will make burning smell from car heater.
Moreover, the heater core of your car is mainly responsible for smoothing the movement of the coolant liquid along with your car reheat and heating systems. Further, there are other indicators of a faulty heater core too.
If your engine overheats despite a normal coolant level, or if your coolant runs out quickly, the heater core is responsible. Frequent fogging inside the cabin is also a sign of a faulty heater core.
Coolant/Cooling System Leaks in car heater
Naturally, leaks are included on this list, given that to effectively operate your vehicle’s cooling system, a 50:50 mixture of antifreeze and water is necessary. This ratio is difficult to change unless the cooling system’s components are disabled or the coolant composition is damaged. Leaks, however, are certain to be among the first things to show when it becomes troubled.
Despite what most owners believe, this condition can be challenging because leaks can occur anywhere, making them unpredictable and difficult to detect. However, you can identify the leak’s source by checking the damage to your car’s radiator, water pump, and connections, among other things.
Problem with the Water Pump
Extremely high engine temperature readings, which are a sign of water pump problems, are similar to those of a blocked radiator.
Moreover, this indicator could probably show or be linked to ongoing engine overheating. The pump can no longer move coolant or hot water throughout the heater core and engine block when this happens.
However, the heater will not work if the heater core takes too long to warm up. In the worst instance, ignoring a malfunctioning water pump could result in more engine damage indeed.
Uncontrolled HVAC can make the car heater takes forever to warm up
HVAC (Heating, Ventilation, and Air Conditioning) equipment needs a monitoring system. In order to control the operation of a heating and/or air conditioning system in a car.
Moreover, Briefly stated, the heating system may not be activated by the buttons, knobs, or haptic feedback touchscreens in your car. Your heater may stop operating as a result of problems caused by shorts, damaged dials, or defective touch screens.
Stagnant Antifreeze through the Heater Component
If the coolant in your vehicle is not moving, further it can cause the car heater to not get hot enough. However, this is similar to the problems that a defective thermostat can cause.
The balance needed for the temperature control system to operate normally is disturbed when the antifreeze is not flowing through the heater component. Moreover, it is rare for the engine coolant to freeze on its own. If the antifreeze becomes stagnant, it is often due to issues with the heater control valve or water pump, which are responsible for circulating the fluid through the cooling system.
Conclusions: why the car heater takes ages to warm up.
Everyone can find it annoying when their car takes a while to warm up in the morning, especially in the winter when you have to go immediately. However, In cold weather, engines require extra time to warm up. However, you know how to examine and fix your car heating problems.
If you notice that it takes much longer than it should for the engine to warm up then you should bring a licensed mechanic to work on your car heater; otherwise, the engine will suffer damage and cost a lot of money.
FAQ’s
What should I do about my car heater, which blows hot air but not enough of it?
A blocked cabin air filter or a broken blower motor may cause if your car heater is blowing hot air but not very strongly.
Can a low coolant level make the car heater inoperable?
Yes, Because coolant is necessary for transferring heat from the engine to the heater core, low coolant levels might result in the heater not working.
How often should I change the cabin air filter in my car?
The manufacturer’s recommendations should be followed every 12,000 to 15,000 miles when replacing the cabin air filter.
Do problems with automobile AC and heaters overlap?
Due to the distinct systems and components that car heaters and air conditioners (AC) use, they can not experience the same issues. However, low coolant levels, a broken thermostat, or a clogged heater core are some typical problems that both systems may encounter, cabin air filter clogs up some common issues that can affect both systems.
What is the secret to keeping a car heater properly functioning?
Monitor and maintain your car’s thermostat, cooling system, heater core, and coolant level in time.
RELATED:
Signs Of A Bad Car Battery Vs Alternator: Explained!
Leave a Reply