Toyota Remote Connect is a feature allows you to remotely start your car, and lock and unlock the doors. Then check the status of your vehicle using a smartphone app. But, sometimes the Toyota Remote Starter not working for the system.
In order to work well, it requires a functioning telematics device, a cellular connection, a GPS signal, and a compatible wireless network.
If any of these factors are not available or are not working well, then the system’s functionality and availability may be limited or not possible. It is important to ensure that all the necessary components are working well. And that you have a strong cellular signal and a compatible wireless network before attempting to use Toyota Remote Connect.
The main reasons for a Toyota remote starter not working are low or dead battery in the remote, in the remote starter and many more.
If your Toyota remote starter is not working, explore this article to learn the reasons & solutions.
Less Than 1/4 of the Tank of Gas
If your Toyota remote starter is not working, and you have less than 1/4 of a tank of gas. It could be that the remote starter is programmed to not work when the gas level is low. This is a safety feature to prevent the engine from running when there is not enough fuel to get to a gas station. You will need to put more fuel in your tank before you will be able to use the remote starter again.
It’s also worth noting that some Toyota models have a built-in safety feature that prevents the remote starter from working if the fuel level is too low. The threshold level is usually around 1/4 tank, but it can vary depending on the model and year of the car.
No locks on the doors
If the Toyota remote starting isn’t working and the doors shut. But it’s not working, it’s possible that the remote starter got set not to work if the doors weren’t locked. The engine won’t start if someone is inside the car or if the doors are open thanks to this safety feature. Before you may use the remote starter again. You must lock the doors using the manual lock or the key fob.
Also, if any door or trunk is open, some models may have a mechanism that disables the remote starter. This is a security mechanism that stops the car’s engine from starting while someone is inside. Verify the trunk doors and all the other openings.
The hoods and the Trunk are Open
Whereas if the hood or trunk of your Toyota is open, and the remote starter isn’t operating. It’s possible that the remote starter is programmed not to function when either is open. This is a safety feature to prevent the engine from starting.
If someone is working on the car or if something is preventing the hood or trunk from closing well. Before using the remote start once more, you must close the hood and trunk.
In some versions, if the hood or trunk is open, then a feature may disable the remote starter. As well as a safety measure, the engine won’t start if someone is working on the car or if something is preventing the hood or trunk from shutting completely. Before attempting to remote-start the automobile, make sure the hood and trunk are firmly closed.
The alarm has gone off.
If the alarm is activated, it will disable the remote start feature as a safety measure. This is to prevent a potential thief from using the remote start to steal your car. If you find yourself in this situation, you will need to deactivate the alarm before you can use the remote to start it again.
You can do it by using the key fob or manually unlocking the doors and disabling the alarm system. It’s also a good idea to check your owner’s manual or contact the dealer for further assistance on how to deactivate the alarm.
Your Remote Connect Trial Expired
Many vehicles now come with a trial period for the remote connect feature. Which allows you to start, lock, and unlock your car remotely using a smartphone app or a web portal. Once the trial period has ended, the feature will no longer work unless you subscribe to the service or purchase an additional package.
The Car Must be in Park
The Car must be in the “P” (Park) position before the remote starter will function. This is a safety feature to prevent the car from moving while the remote starter is engaged. Before using the remote starter, make sure the car is in “P” (Park) and the parking brake is on.
Also, double-check that the shifter is in the Park position, as sometimes the shifter moves out of the park unknowingly. If the car is not in the “P” position, and you attempted the remote start, then the engine will not start. And you may receive a warning message or an error code.
Smart Key Can’t be Inside
A “smart key” is a type of keyless entry system that helps to lock and unlock a vehicle without physically inserting a key into the ignition.
In order to the system to work, the smart key must be in proximity to the vehicle, usually within a few feet.
If the smart key is not within range or if the battery in the key is dead, then the vehicle will not be able to be locked or unlocked. In such cases, you can use the key in the traditional manner by inserting it into the ignition.
The 12V Battery is Running Low
A 12V battery is a type of lead-acid battery that is common in vehicles to start the engine and power accessories such as lights and radios. However, if the battery is low, it may not have enough power to start the engine.
Additionally, the vehicle’s electrical system may not be able to power all the accessories, and some may not work.
You may see the warning signal on the dashboard, or the engine may crank but not start. In order to fix this issue, you have to charge the battery or replace it if it’s too old or damaged.
It is also important to check the alternator and the charging system. However, they may be causing the battery to discharge if they’re not working well.
When your Your Toyota Remote Engine start is Going Away: What You Can Do! Let’s see that
Toyota Remote Connect Server Has Issues
It may indicate a temporary issue with the server that links your automobile to the remote starter system. If your Toyota remote starter isn’t functioning, and you assume the problem may be with the remote connect server.
Technical difficulties, maintenance, and updates occasionally cause things like this to happen. The remote starter function might not function until the server is back online.
You can check the status of the server by visiting the Toyota website or contacting customer service. Also, you can try to troubleshoot the phone connected to the server. However, Check if your phone has an internet connection, and check if the server is down in your region.
Why is Toyota Charging for A Remote Starter?
Toyota may be charging for the remote start feature because it is not a standard feature on all models and trims. However, Some models may come with the remote starter feature as standard equipment. But others may need an additional package or option to be added.
Additionally, some newer models may have the option of adding Toyota Remote Connect.
which allows remote start through a smartphone app and a subscription, and this service may also require an additional cost.
Moreover, The cost of adding the Toyota remote starter feature can vary depending on the model, trim level, and specific option package that includes it. Further, It is best to check with your Toyota dealer for availability, cost, and installation options.
It’s also worth noting that adding a remote start system to a car is not a trivial task, and it requires installing additional hardware and software, thus the cost.
Conclusion
Refer to the owner’s manual for further guidance or get in touch with the Toyota dealership for assistance. While none of the troubleshooting methods for your Toyota remote starter can not fix the problem.
However, the dealership can run a diagnostic test on the remote start system of the car. In order to identify the issue. To get the remote to start working again, they might also be able to reprogram it or repair any broken components.
Keep Reading Why Is My Jeep Compass Screen Not Working?: Facts!
FAQs
How Do I Reset My Toyota Remote Starter?
Locate the starter disable then switch under the dashboard near the steering column. And then turn the key to reset a Toyota remote starter.
How Do I Activate My Toyota Remote Starter?
To activate a Toyota remote starter, press and hold the remote starter button for 2–3 seconds until the engine starts.
What Is the Most Common Reason for Toyota Remote Starter Failure?
The common causes of a Toyota remote starter not working is a low or dead battery in the remote indeed. Also issues with the remote starter itself, a problem with the vehicle’s electrical system, and range issues.
Is Toyota Connect Services Needed For Toyota Remote Start To Work?
Toyota Connect Services are not required in order to the Toyota remote to start to function. However, it uses a key fob.
How Can You Unlock Toyota Remote Start?
To unlock a Toyota remote start, press the unlock button on the key fob or use the key to manually unlock the doors indeed.
RELATED:
Why My Jeep Patriot Radio Not Working? Explained!
Burning Smell From Car But Not Overheating: Causes & Solutions!